Friday, November 18, 2016

Head Gasket Chronicles - Nearing Mordor.

So, it was busy.

Really busy.

I worked, did ACLS, PALS, worked again and managed to get a little done on the truck.  Yesterday was a day off and I just shut it down.  I tried to do stuff and "Nope"ed instead.

Oh yeah, and building a wall.  Don't forget building a wall.

Our house is a manufactured house and as such, is up off the ground. The skirting that surrounded it and kept our air was mostly rotten and partially ripped off. We had 600 cinder blocks delivered a few weeks back with the intention of building the skirting wall out of them.

Then the truck broke.

And here we are.

I was going to put up a picture of the wall, but even I have some pride.

Winter was coming too fast and I just stacked the blocks next to the house.  I didn't have time to make it all nice and neat and level.

Sigh.

I know, I know, on to the truck pictures.



With the wiring harness out of the way, things are a little more accessible.

Took off the fuel filter bracket.  Long overdue.

I have stacks of parts labeled with electricians tape like this.

Over on the other side, I finally got the glow plug controller free.
 That one took a minute. I couldn't figure out how to get the larger connector undone. I slid the exterior of the body of the connector out from under the plug and toward the driver side fender. 

Behind it, I found a bastard.

The glow plug controller bracket... Bastard.

Took off all the bolts and discovered another one.
Yeah, there's another bolt on the left, inboard side behind the bracket and snuggled up near the firewall.  It's a 12 mm for those of you playing along with the home game.  The space is too small for a ratchet. So, the only option I could see was a box wrench with my hand sliding back behind the bracket. 

Didn't work.

This stupid bolt frustrated me to no end. I actually didn't get if off until I had lots more off. I got it after I got the fuel rails and fuel lines off the top of the engine. I crawled up on top of everything and used the closed end of another wrench over the open end of the 12 mm so I could push it down.  Finally came off.  I called that thing several names unpronounceable in any language.

Anyway.

After struggling and failing with that bracket for a while, I moved to the passenger side and pulled off the little bracket up at the front.

For some reason, the picture won't upload.  Don't worry, it is easy to remove, one allen wrench and thirty seconds.  That's why I chose it.

Now, on to the fuel lines.

I pulled all the fuel lines going across the top of the engine and the lines going from the fuel rails to the injectors.

Oh NO!  It looks like the head gasket is shot here.  I hope that's all it is.

Sans fuel lines

Seriously, that's disgusting. 
Then, I pulled off the big tube there in the middle, the exhaust gas recirc maybe?  Big funnel, that's what I'll call it.

Big funnel, right in the middle.

Yeah, more disgusting in there too.

Took it, took the fuel rails and brackets, all of it.

I finally even got the bastard out.
And that is where I leave it. 

Now, I have to figure out how to get the y-bridge out without pulling the turbo. They say it's easy, just unbolt the 4 bolts.

Yeah, guess where two of those bolts are?

Some more research is required. Nothing tomorrow though, kid's flag football party and then off to work.  Maybe Sunday or Monday. 



No comments:

Post a Comment